Improve Abrasion Resistance of Natural Rubber Coated Glove in Relation to En388:2016

Show simple item record

dc.contributor.author Wijayasiri, S.H.A.D.P.
dc.date.accessioned 2021-10-26T09:43:47Z
dc.date.available 2021-10-26T09:43:47Z
dc.date.issued 2014
dc.identifier.other UWU/PLT/14/0045
dc.identifier.uri http://www.erepo.lib.uwu.ac.lk/bitstream/handle/123456789/7396/PLT%2014%20045-24022021122025.pdf?sequence=1&isAllowed=y
dc.description.abstract Physical properties and performances are very important factors for natural rubber coated gloves as glove themselves should not cause any harm at the end use. Most of them are designed to fulfill different purposes like chemical resistance, heat resistance and mechanical hazard resistance. EN 3882016 is one of the European Standards which is applicable for the protective gloves against mechanical risks. Under EN 3882016, mainly the glove performance Ike abrasion, cut, tear and punch resistivity are tested. Ratings are given according to performance test results and the glove marking which indicates the test results will be paste on the glove surface. Abrasion resistance of the polymer coating of a natural rubber coated glove may depend on many factors Ike bonding strength between yarn and the polymer coating, crack growth of polymer coating and bonding properties of polymer. Fumed silica and precipitated silica were used as a compound modification by replacing the traditionally used non-reinforcing filler CaCo3. Silane coupling agents were used as surface modifiers to increase the surface activity and the bonding ability. Three separate experiments were conducted as developing silica dispersion, replacing the filler and optimizing the filler loading. "Surfynol" was identified as the best surfactant to prepare silica dispersions as it acts as a good wetting and dispersing agent. For both precipitated and fumed silica, loading levels varying from 20phr (Parts per hundred of rubber) to Sphr were tested for the abrasion resistance. At the loading level of 7phr, the maximum performances against abrasion resistance was observed while fumed silica filled samples showing better abrasion resistivity compare to the precipitated silica filled samples. Key words: Precipitated silica, Fumed silica, Silane coupling agents, natural rubber coated glove, abrasion resistance. en_US
dc.language.iso en en_US
dc.publisher Uva Wellassa University of Sri Lanka en_US
dc.relation.ispartofseries ;UWU/PLT/14/0045
dc.subject Palm and Latex Technology and Value Addition Degree Programme ( PLT) en_US
dc.title Improve Abrasion Resistance of Natural Rubber Coated Glove in Relation to En388:2016 en_US
dc.title.alternative Research Article – PLT 2014 en_US
dc.type Thesis en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search UWU eRepository


Browse

My Account